THE GO-TO SOURCE FOR POOL TABLE REPAIR PRODUCTS
SERVING CLIENTS IN BURLINGTON, GREENSBORO & DURHAM, NC

3" Pocket Liners
A382736

These are 3" black plastic pocket liners. These have a lip around the top that gives a finished edge around the edges of the rails.

A set of 6 consists of 4 corners and 2 side pocket liners.

4" Pocket Liners

A382735

These are 4" black plastic pocket liners. These have a lip around the top that gives a finished edge around the edges of the rails.

A set of 6 consists of 4 corners and 2 side pocket liners.

4" Rubber Pocket Liners
A382734 

This is a set of 4" black rubber pocket liners. This pocket has a lip around the top that gives a finished edge around the edges of the rails.

A set of 6 that consists of 4 corners and 2 sides.

Black Leather Basket for Pocket

A382610

This is a set of 6 black leather baskets for the pockets on a pool table. These baskets have the same cut leather fringe at the bottom of the basket.

Does not include the irons or the tops of the pockets.

Black Rubber Drop Pockets

A389912

This is a set of black rubber, heavy-duty drop pockets for your pool table. Fits most tables that uses an inside drop pocket.

Sold in a set of 6.

Large Black Rubber Gully Boot

A387801

Set of large black rubber gully boots. Length is 11 ½", the width is 4" and the height is 4".

For use on ball return pool tables.

Leather Pockets #6 Iron with Fringe

A382765

This is a set of 6 leather pockets with a #6 iron. The iron inserts into the rails. This pocket is for a furniture style table that uses outside leather pockets. An outside leather pocket is actually seen on the table as opposed to a set of inside drop pockets that are contained on the inside of the framework of the table. Please call for color finishes available.

This pocket has a fringe on the outside of the pocket. See our other pockets that have a shield on the outside instead of a fringe.

Leather Pockets #6 Iron with Shield

A382763

This is a set of 6 leather pockets with a #6 iron. The iron inserts into the rails. This pocket is for a furniture style table that uses outside leather pockets. An outside leather pocket is actually seen on the table as opposed to a set of inside drop pockets that are contained on the inside of the framework of the table. Please call for color finishes available.

This pocket has a leather shield on the outside of the pocket. See our other pockets that have fringe on the outside instead of a shield.

Plastic Drop Pockets
Small Plastic Drop Pockets

A389790

This is a set of black plastic drop pockets for your pool table. Fits most tables that use an inside drop pocket.

Sold in a set of 6.

Pocket Reliners - Black

A386932

This is a set of 4 handcrafted leather pocket reliners. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is black.

Sold in a set of 4.

Bar-Co Products

Pocket Reliners - Brown

A386934

This is a set of 4 handcrafted leather pocket reliners. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is brown.

Sold in a set of 4.

Bar-Co Products

Pocket Reliners - Tan

A386930

This is a set of 4 handcrafted leather pocket reliners. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is tan.

Sold in a set of 4.

Pocket Reliners with Shims - Black

A386938

This is a set of 4 handcrafted leather pocket reliners with matching leather shims. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is black.

Priced at $199.95 for a set of 4.

Bar-Co Products

Pocket Reliners with Shims - Brown

A386940

This is a set of 4 handcrafted leather pocket reliners with matching leather shims. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is brown.

Sold in a set of 4.

Bar-Co Products

Pocket Reliners with Shims - Tan
A386936

This is a set of 4 handcrafted leather pocket reliners with matching leather shims. These reliners reduce the size of the corner pockets. By practicing and making shots with a tighter pocket, it will improve your game. The same shots are easier without the reliners after practicing.

Installation instructions are included. These pocket reliners can be bent or cut to fit your table. Color is tan.

Sold in a set of 4.

Bar-Co Products

Small Black Gully Boot

Small Gully Boot with Ears

A387803

Set of small black rubber gully boots for ball return tables. Used on coin operated tables and most home ball return tables. Can be trimmed if needed.



Bar-Co Products

K44 Century Cushions

A386108

Set of 6 Century cushions with the K44 profile. Made of Grade A gum rubber.

Roll a ball against each rail to see if the ball rebounds properly. If it doesn't, the rails are dead. For proper rebound and accuracy, install new rubber cushions. These cushions will fit an 8' table or can be trimmed to fit a 7' table. Each cushion is 41 ½" long.

K55 Cushions 44"

A386130

Set of 6 cushions with the K55 profile. Made of Grade A gum rubber.

Roll a ball against each rail to see if the ball rebounds properly. If it doesn't, the rails are dead. For proper rebound and accuracy, install new rubber cushions.

These cushions will fit an 8' table or can be trimmed to fit a 7' table. Each cushion is 44" long.

K66 8' Pool Table Cushions

A386104

Top grade cushions for accuracy. You can't play a game of pool with "dead" rails. Replace those "dead" rails with top-of-the-line cushions. New cushions will add accuracy and bounce to your game.

These cushions are for an 8' table or smaller. Full K66 profile. Sold in a set of 6. Also, check to see if you need rubber facings to apply to the ends of the cushions.

K66 9' Pool Table Cushions

A386105

Replace those "dead" rails with new rubber cushions. New cushions will add accuracy and bounce to your game. These cushions are for a 9' table. Also, check to see if you need rubber facings to install on the end of those cushions. Sold in a set of 6.

Rubber Cushion Facing

A382745

Set of black rubber facings that are attached to the end of the cushions before covering the rail cushions with pool table cloth.

Set of 12 facings.

U23 Cushions

A386110

Set of U23 pool table cushions. They are 1 1/16" by 1 1/8". Length is 48"

A new set of cushions can keep your table playing like new.

Sold as a set of 6.

Adjustable Fork Bit Wrench

A382950

Made of iron, this adjustable fork bit wrench is made especially for replacing or removing antique round head rail bolts commonly used on antique Brunswick and AE Schmidt tables.

Feather Strip Tapping Block

A386909

Our tapping blocks are made of IPE wood. IPE wood is a dense, heavy, South American hardwood that is highly dent resistant, waterproof, and heavy. The feather strip tapping blocks are precision cut by the Home Entertainment & Decor Systems staff. The corners are contoured on one side for easy holding with a square surface on the other for exact feather strip placement. Blocks are 5" x 2 ½" x 1" thick.

Plastic Wedges

A386914

These are black plastic wedges with ridges to help avoid slippage. Ideal for leveling pool table slate.

You can also find 101 uses for these around the house.

Sold per piece.

Tefco Master Spots

A382004

These are 1 ¼" round spots for your pool table.

Can of 12 spots.

35 Cent Coin Chute

A384500

We still have a few of the 35 cent coin op mechanisms. The chute holds one quarter and one dime. Ideal for those organizations and places where a 35-cent game is still in fashion.

Coin Mechanism w/Blockout

A384800

E.S.D. coin operated mechanism for a coin operated pool table. It holds four vertical coins and can be set from .50 cents up to $1.00.

Also, after the coin mech has been set, it can be changed again from $1.00 down to $.50 cents by inserting or removing the inserts in the vertical coin slots.

Metal Insert for Coin Chute

A384810

Metal insert pieces for a coin op mechanism. Approximately 1" long. These are priced per insert.

Plastic Insert for Coin Chute

A384805

Plastic insert pieces for a coin op mechanism. Approximately 1" long. These are priced per insert.

Abalone Diamond Shape Rail Sight

A383710

Diamond shaped rail sight made of abalone. The colors are very distinctive. These measure 1 ¼" long and ½" wide. A pool table requires a total of 18 rail sights. In some cases, a nameplate on the head rail takes the place of one sight.

Diamond Shape Rail Sights

A383705

Diamond shaped mother-of-pearl rail sight. They are 1 ¼" long and ½" wide. A table requires a total of 18 rail sights for a table. In some cases, a nameplate on the head rail will take the place of one sight.

Double Diamond Abalone/MOP Sight

A383714

Rail sights are used as reference points for aiming when playing pool. Genuine abalone diamond sights with genuine mother-of-pearl inlay are found on custom or high end pool tables. If you are restoring your pool table and use these sights, your pool table rails will have a luxurious custom look. 

Mother of Pearl Diamond Shape Rail Sight

A383801

Diamond shaped rail sight made of mother-of-pearl. These are 1 ¼" long and ½" wide. A pool table requires a total of 18 rail sights. In some cases, a nameplate on the head rail takes the place of one sight.

Plastic Diamond Shape Rail Sights

A383802

Diamond shaped plastic rail sight measuring 1 1/8" long and 7/16" wide. A pool table requires a total of 18 rail sights. In some cases, a nameplate on the head rail takes the place of one sight.

Round Abalone Rail Sights

A383712

Round rail sights made of abalone. The colors are very distinctive. These sights measure 7/16" in diameter. A pool table requires a total of 18 rail sights. In some cases, a nameplate on the head rail takes the place of one sight.

Round Rail Sights

A383700

Round mother-of-pearl rail sights measures ½" in diameter. A table uses a total of 18 sights for all the rails. In some cases, a nameplate on the head rail takes the place of one sight.

Apron Corner Miters for Rail Caps

A383860

Set of four narrow black plastic corner miters. They are 8" long and are 1" wide.

Sold in a set of 4.

Black Plastic Rail Cap

A383835

These are black plastic rail caps and come in a set of 4 corner caps and 2 side caps. They are 5" long and are 3 ½" wide. These rail caps have a flat blunted front.

Sold in a set of 6.

Chrome Rail Cap

A383822

These are chrome rail caps and come in a set of 4 corner caps. They are 4 ¼" long and are 3 ¼" wide.

Sold in a set of 4.

Corner Miters

A383824

These are a wood-like brown plastic corner miter and come in a set of 4. They are 7 1/2 " long and are 3 3/8" wide.

Sold in a set of 4.

Wide Corner Miters for Rail Caps

A383865

These are wide black plastic corner miters and come in a set of 4. They are 8" long and are 3" wide.

Sold in a set of 4.

3" & 4" Round Hardwood Shims/Leg Levelers

A389615

Hardwood shims/leg levelers made by Home Entertainment & Decor Systems can be used to level your pool table or any piece of furniture that may need leveling. They are 3" and 4" in diameter.

3" & 4" Shims/Wedges

A389630

3" and 4" hardwood shims/wedges made by Home Entertainment & Decor Systems can be used to level your pool table, furniture, or you could use them in construction. These are 5 for $1.50.

3" & 4" Square Shims/Leg Levelers

A389600

Hardwood shims/leg levelers made by Home Entertainment & Decor Systems. They can be used to level your pool table or any piece of furniture that may need leveling. They are 3" and 4" square.

5 Degree Hardwood Wedge

A389645

Hardwood shims/wedges made by Home Entertainment & Decor Systems can be used to level your pool table or furniture, or you could use them in construction. These are 10 for $3.00.

5" & 6" Round Hardwood Shims/Leg Levelers

A389620

5" and 6" diameter hardwood shims/leg levelers are made by Home Entertainment & Decor Systems. They can be used to level your pool table or any piece of furniture that may need leveling.

5" & 6" Shims/Wedges

A389635

5" and 6" hardwood shims/wedges made by Home Entertainment & Decor Systems can be used to level your pool table or furniture, or you could use them in construction. These are 5 for $1.50.

5" & 6" Square Shims/Leg Levelers

A389605

5" and 6" square hardwood shims/leg levelers made by Home Entertainment & Decor Systems can be used to level your pool table or any piece of furniture that may need leveling.

7" & 8" Round Hardwood Shims/Leg Levelers

A389625

7" and 8" diameter hardwood shims/leg levelers made by Home Entertainment & Decor Systems can be used to level your pool table or any piece of furniture that may need leveling.

7" & 8" Shims/Wedges

A389640

7" and 8" hardwood shims/wedges made by Home Entertainment & Decor Systems can be used to level your pool table, furniture, or you could use them in construction. These are 4 for $1.00.

7" & 8" Square Shims/Leg Levelers

A389610

7" and 8" square hardwood shims/leg levelers made by Home Entertainment & Decor Systems can be used to level your pool table or any piece of furniture that may need leveling.

Large Leg Leveler

A382847

Large metal leg leveler with a black rubber rim around the bottom of the leveler. It measures 6 ¼" diameter and about 3" tall not including the screw. The screw is 2" tall.

For use on commercial style pool tables.

Leg Leveler Caps

A435675

Set of 4 grey plastic leg leveler caps. 1.75" outside diameter and 1" inside diameter. This product has many uses.